AIRJETTM High Flow DC Electric Air Pump with Long Life Brush Motor High Pressure Vacuum Wob Piston Pump 12v 24V optional 15LPM 16Bar -90KPA
特点 Features
- 无油润滑Oil-Free
- 结构紧凑Compact size
- 耐腐蚀性Corrosionresistant
- 长寿命Long life
- 免维护Maintenance Free
- 重量轻Low Weight
- 低噪音低振动Low noise level&vibration
- 低功耗High efficiency
- 可以任何方向安装Can be mounted in any plane
- 直流电机DC Motor
-
应用 Typical Applications
- 气体采样分析Gas detection devices
- 污水处理Sewage disposal
- 监护仪Patient Monitoring
- 喷绘打印Wide-Format Printer
- 血压计Blood Pressure Monitor
- 生化仪Bio-Chemical Analyzer
- 气压按摩Gas massage products
- 电解质Electrolyte
- 实验室设备Lab equipment
- 美容设备Beauty equipment
- 洗板设备Microplate Washer
- 化学分析Chemistry analysis
- 环境检测Air Sampler
- 真空吸取Vacuum transfer
- 止血带Automatic Tourniquet
- 消毒柜Autoclave
-
技术参数 Technical Data
| 额定电压Rated voltage | DC24V |
| 额定电流Rated current | 6.0A |
| 空载流量Free flowing | 15L/M |
| 最大压力Max. pressure | 16Bar |
| 最大真空度Max. vacuum | –90Kpa |
| 使用温度 Ambient temperature | 0-40℃ |
| 重量Weight | 1600g |
- 可以在任何方向安装使用Can be mounted in any plane
- 真空和压力均可applicable as vacuum pump or pressure pump
- 材质:Parts in contact with medium Option
- 泵头Pump head: PPS
- 活塞杯/阀片Piston, valves: PTFE and EPDM
-
外形尺寸:Dimensions(mm)
Notes of micro air pump
- Do not use this product beyond the limit specified in this specification.
- When using the brushless motor, be noted that the input power should be constant pressure and filtering.
- Keep the inlet and outlet clean and smooth , no solid particles.
- May contain a small amount of water, not solid foreign objects into the pump body.
- In inlet and outlet of the non-clean,please install air intake filters.
- The specification of this product is only for your reference
- The specific details should check the real products.
- Products should be made according to customer’s request within the permitted range.
- Non-professional person should not disassemble this product.
- Long service life at room temperature environment.
- Can supply a variety of certifications according to customer’s requests.
- Please ensure the input voltage meets the specification and make sure the power polarities are connected properly.
- Connect a filter to the inlet to block dust, fiber,water drops when the operational environment is worse.
- Use φ4 silicone tube and Connect a silencer to the outlet for noise reduction purpose.
- Make ventilation holes or slots on the bottom or side of device housing for heat dissipating is strongly recommended.
- Use a piece of thick sponge or foam to wrap the pump for installation would reduce noise and vibration.
- To extend the life time, Suggest to design a control circuit include a pressure sensor to let the pump work in intervals.
- Pack and Store the pump well in clean, temperature and humidity controlled place to avoid rusting of motor.
Application of micro air pump
- Electronic products,agriculture,finishing,light industry products
- Analytic-al instruments
- Chemical and production engineering
- Various ancillary equipment
- Medical Electronics: Blood pressure; negative pressure wound therapy device; oxygen machine; breast pump; the suction machine; ICU monitor; ozone disinfection; etc.
- Household appliance: Vacuum fresh juice machine; coffee machine; automatic tea; fragrance machines; dryers; fragrant Irons etc.
- Health Massage: Massage chair; neck massage; aquarium; beauty device etc.
